P4 Stormwater Pricing & Services

The Rain-mX system includes a computer module, battery module, solar panel, tipping bucket rain gauge and an environmental sensor (temperature, barometric pressure, relative humidity).  Two Rain-mX mounting configurations are available for additional cost (below).  The stand alone configuration is shown.

LIQUA-Level includes the computer module, battery module, solar panel, and float sensor needed to document water level.  Price shown is for sensor lengths up to 48 inches.  Contact P4 for longer sensor lengths.  Sensor lengths up to 120 inches are available.  The Device Bracket with LIQUA-Level Standard Mount is shown (prices below).

LIQUA-Level EPC includes the computer module, battery module, solar panel, and pressure sensor needed to document water level.  Water levels up to 30-feet can be measured.  Burial of the pressure sensor is required.  The Device Bracket (price below) is shown.

INFIL-Tracker PD1 is an innovative computer, solar panel, and cell-transmission device integrated into a PaveDrain block within a permeable pavement surface.  Price shown is for a sensor length up to 36".  Contact P4 for longer sensor lengths.

INFIL-Tracker PD 2 has the computer module, battery module, and solar panel outside the PaveDrain permeable pavement surface.  Stand-alone and existing pole support configurations for the modular device components are available (pricing below).  Price shown is for sensor lengths up to 36 inches.  Contact P4 for sensor lengths exceeding 36 inches.  Installation may require curb cuts, sealant, conduit, and burial for wiring runs.

INFIL-Tracker Paver is for "paver" permeable pavement surfaces.   The sensor access frame requires coring of pavers - contact P4 to learn more.  Standard and pole mounting configurations for the modular components are available (pricing below).  Price shown is for sensor lengths up to 36 inches.  Contact P4 for sensor lengths exceeding 36 inches.  Installation may require curb cuts, sealant, conduit, and burial for wiring runs.

Soil-SENSE has the computer module, battery module, and solar panel adjacent to the biofiltration system digitalized.  Stand-Alone and Device Bracket on existing pole support configurations for the modular components are available (below).  A Device Bracket with Stand-Alone Pole Support is shown.

Cam-VIEW has the computer module, battery module, and solar panel adjacent to the mounting of the camera device.  A Wall Mount bracket for the camera and Stand-Alone Pole support configuration for the modular components are available (below).

The Flow-RTC device includes computer module, battery module, and solar panel.  The device is intended to be coupled with other systems (e.g. valves, aeration systems) and provides control of flow or on/off states.  P4 can help aggregate a solution for you that uses Flow-RTC.  

VELO includes the computer module, battery module, solar panel, and sensor needed to document the velocity of open channel flow without contacting the fluid.  A Standard Support Bracket for the sensor, a Device Bracket to support the device, and a Stand Alone Pole support are available.  It should be noted that DEPTH and VELO systems can be used in an aggregated solution for open channel flow.

DEPTH includes the computer module, battery module, solar panel, and sensor needed to document the velocity of open channel flow without contacting the fluid.  A Standard Support Bracket for the sensor, a Device Bracket to support the device, and a Stand Alone Pole support are available.  It should be noted that DEPTH and VELO systems can be used in an aggregated solution for open channel flow.

P4 Blu-Smart includes several configurations depending up roof-drain location.  The Master Valve module is shown above.  Other configurations are available (MSRPs for these complementary systems are lower).  There are four P4 devices within the Master Valve configuration.  Annual software licenses for all four (4) devices is required.  Family-plan pricing options are available.  Extended warranties for P4 Blu-Smart devices are also available.  Contact P4 for details.

AVFM includes an Area-Velocity-Flow-Measurement (AVFM) sensor, sensor mounting ring, computer module, solar panel, AGM deep cycle battery, and outdoor (IP 67) rated enclosure.  Standard mount supporting hardware is available (below).  Contact P4 for details.

The Rain-mX stand-alone mount comes with a 4-foot tall powder coated pole with base plate along with stainless steel bracket, stainless steel plate, and hardware to support the Rain-mX device and tipping bucket rain gauge. Ballast is supplied by the customer.

The Rain-mX bracket facilitates attachment of the system to an existing support pole.  It comes with stainless steel brackets and stainless steel hardware for the computer system AND the tipping bucket rain gauge.

The Stand Alone Pole is used to support P4 Device Brackets.  The base is easily driven into the ground using traditional fence-post driving equipment.  The height can be customized.

The P4 Device Bracket is used to mount the computer module, battery module, and solar panel for P4 devices.  The device bracket can be mounted to walls, posts, poles, and P4's Stand-Alone Pole.

The Cam-VIEW wall mount includes stainless steel components and fasteners needed to mount the device to a wall. 

This VELO/DEPTH sensor mounting bracket can be used for both VELO and DEPTH sensors.  The bracket can accommodate both sensors simultaneously for open channel flow velocity and flow depth measurement.

The LIQUA-Level wall mount supports the sensor against a concrete wall.  The wall mount includes stainless or powder-coated steel brackets with stainless steel hardware along with PVC sensor enclosure.  Price shown is for sensor lengths less than 72 inches.  Contact P4 for sensor lengths exceeding 72 inches.

The LIQUA-Level drywell sensor mount supports the sensor within  an inlet (or drywell) against a concrete wall.  The wall mount includes stainless steel brackets, a stainless steel slide track with roller supports and stainless steel hardware along with PVC sensor enclosure.  Price shown is for sensor lengths less than 84 inches.  Contact P4 for sensor lengths exceeding 84 inches.

The LIQUA-Level standard mount supports the sensor with an adjacent support pole.  The standard mount includes a stainless steel pole, stainless steel brackets with stainless steel hardware, and a PVC sensor enclosure that can in some circumstances be omitted.  The pole may be driven into the ground, or a base frame with ballast is possible.  Contact P4 with questions.

Direct-bury cabling lengths are project specific.  Cabling is provided with connectors compatible with P4 sensors and computer modules.  The direct bury cabling is used to facilitate connection of sensor to computer module.

Annual software licenses are required for all P4 devices.  This license includes annual cellular data-plans and access to P4's browser-accessed map-based interface for data viewing and download.  It also includes access to P4's more advanced data lake for access to detailed device information (e.g. battery health).  Family plan (bundled) pricing for multiple devices is available.  Contact P4 for additional details.

P4 has been acquiring and curating data from its devices all over North America.  P4 has recorded literally 1,000,000's of data points in the last 5 years.  We have developed targeted and very efficient methods and algorithms for viewing stormwater infrastructure data from permeable pavement systems, biofiltration systems, below ground systems, surface systems, and on-structure systems.  Contact P4 to learn more about data curation and reporting services we offer.